ZN1000 Automatic Concrete Block Making Machine

The T series model are designed by Germany Engineers at R&D Centre in Emden, Germany and are well known for its High Production capacity and stable performance.

ZN1000 Concrete Block Machine
  • The T-15 Automatic Block making machine is equipped with Frequency Conversion Vibration system with double vibration motors, namely 7.5 KW×4 Siemens motors for bottom vibration, and 5.5 KW×2 MVSI motors for top vibration. It is also equipped with the Siemens frequency converter.
  • For reliable performance the product is outfitted with Siemens S7 PLC, as well as Touch screen and electrical components of Siemens and Turck.
  • Moreover the Hydraulic system of this machine is composed of integrated modular units from Germany & Italy. Rexroth pump, as well as ABB or Siemens motors

 

Features

Main Features :

(1) High-effective Vibration

Adopt the most-advanced vibration technology from Germany. The vibration table consists of dynamic table & static table, which greatly improves the vibration efficiency and guarantees the high quality of concrete products.

(2) High-efficient Hydraulic System

The Hydraulic pump & valve are from international brand. Adopt high-dynamic proportional valve and constant output pump to adjust the oil speed & pressure, with the features of high-stability, high-efficiency and energy-saving.

(3) Frequency conversional control & Energy-saving

Frequency conversional technology was re-innovated and improved by German R&D center. It can save 20%-40% power by adjusting the frequency converter, compared to traditional motor; at the same time, it can greatly improve the quality of concrete and prolong the motor lifetime.

(4) Fully-automatic Control

Perfectly combine the automation technology and system from Germany. The automatic control is of easy operation, low failure ratio and high reliability.

(5) Compulsory Feeding

Uses two SEW feeding motors, which control two mixing shafts. The feeding frame, bottom plate & mixing blades are made of high-duty HARDOX steel, which strengthens the sealing performance and prevent the material leakage. The discharging gate is controlled by SEW motor.

(6) Remote Control (Optional)

Use the most-advanced industrial internet technology, with the advantages of remote control & operation, automatic trouble-shooting & maintenance.

Tech Spec

Height of Finished Products

50-500 mm

Bottom Vibration

4 x 7.5 kw

Cycle Time

12-20 s (as per mould)

Top Vibration

2 x 1.1 kw

Hopper Volume

3.8m3 for aggregate
3.8m3 for facemix

Electrical Control

Siemens

Pallet Size

1400 x 1100 x 50 mm
1400 x 1100 x 14 mm

Overall Dimension (L x W x H)

  • 7600 x 2400 x 4400mm

 

Forming Area

1300 x 1050mm

Total Weight

18.3 T (without Facemix)
25.2 T (with Facemix)

Product Size Production/Mould Production cap / 8hr
Hollow Block 400 x 200 x 200 mm 15 18,000 – 22,500
Rectangular Paver
(with face mix)
200 x 100 x 60 mm 54 64,800 – 81,000
Zig-zag Paver 225 x 112.5 x 60 mm 40 48,000 – 60,000

Raw Materials : Crushed Stone, Sand, Cement, Stone dust, Fly-ash.

Finished Products : Concrete Hollow Blocks, Solid Blocks, Colour Paver blocks, Interlocking paver, Kerbstones, Grass blocks, Garden & Landscaping products etc.

Applications : Widely used in Buildings, Industrial shed, Road paving, Port, Bridge approach, Gardens, Landscaping, etc.

Note: The capacity data are theoretical and are dependent on machine settings, mix design, aggregates used and other environmental conditions. All the production parameters are subject to change without prior notice.

Auxiliary Equipment

2 Control System
2 Stacker
2 Vibration System

Production

 

Finished Product